Trixbox 1.1 Asterisk PBX Vmware üzerinde, hemen kullan!

Trixbox Asterisk üzerinde çalışan bir PBX sistemi, kurmakla ugraşmak istemiyorsanız Vmware üzerinde hazır kurulmuşunu torrent linkinden indirebilirsiniz.

Trixbox-1.1.rar.torrent 26K Toplam Boyut :~300MByte

Özellikler

  • Web Interface to controll most of the features of Asterisk PBX.
  • SIP and IAX protocol stack (H.323 can be added). POTS FXS/FXO and T1/E1 are not available on VMware due to timing issues.
  • Digital Receptionist automaticaly answers incoming calls and gives caller a choice of actions through IVR)
  • Timers allow to set up different time patterns for call handling. It allows to direct weekend calls differently than weekday calls for example.
  • Conference Bridge to set up conference calls
  • Direct Inward Dial (DISA) to connect to the PBX from remote site as if you were connected localy
  • Star Numbers to access star features. (like *70 to enable call waiting and *71 to desable it)
  • Follow me to ring a desk phone and a cell phone when a call comes in
  • Inbound Routes to direct calls depending on caller ID and interface by which a call arrives
  • Outbound Routes to direct calls to different providers for Least Cost Routing for example.
  • Paging and Intercom for some phones (Grandstream and Snome)
  • Queues to queue-up incoming callers like in a call center
  • Ring Groups to ring multiple phones upon call arival
  • Call Log with various reporting capabilities to see who called whome and when
  • Voice Mail system with ability to send voice mail by email as an attachments.
  • Web Interface to Voice Mail
  • Fax Receiving with PDF conversion. Received faxes can be sent to you by email as a PDF file
  • Call Recordings to record all or some calls or fragments of calls
  • Control Panel to see what is going on at a glance and controll calls with drag-and-drop
  • Dynamic Configuration to add or remove functionality on the fly
  • VoicePulse integration to simplyfy setup for use with a VoicePulse account if you have one.

To run this image you will need a VMware Player (or Workstation). Un-rar downloaded file and then .vmx file in VMware player. After boot loging with root password “password”. If your network has a DHCP server, image should pick-up IP address automaticaly. To check your current IP address, login to root and do

# ifconfig eth0

You should see image IP addres in the first line of the output.

However for real use of this image it is better to set up image IP staticaly with

# system-config-network

to allow SIP and IAX calls to go public network you need to set up your have to open firewall ports and DNAT them to the IP of this image.

All configuration is done through web intereface. To use it, open your browser on the IP address of the virtual machine.

Yorum Yapın

*
*